Scatt

A.SCATT MX-02

 SCATT MX-02

It’s an electronic computer trainer intended for shooting practice with fixed targets. The unique feature of this system is the ability to train either in the dry fire mode or in live fire, using real ammunition. The trainer is also designed to be used both indoors and at open shooting ranges.

 

Shooting trainer contents:

Optical Sensor

Optical Sensor – (model: MX-02) mounted on a gun and connected to the USB port of your PC. The sensor registers with high precision all movements of your weapon during aiming and at the moment of the shot (trigger release).

The sensor weighs only 36 grams (1.2 oz) with the mounting kit, and therefore does not offset the balance of the weapon.The optical sensor fit for training on distances from 2.5 meters and above.

The SCATT Software allows automatic calibration of the sensor in relations to the gun’s sighting axis, therefore, there is no need to make any adjustments to the weapon’s sights. The sensor also automatically compensates for the gun’s canting.

71t (1)
Mounting kit for the optical sensor — includes allen key, mounting prism with adjusting and metal strip with screw that are used for fixing the sensor on the barrel of different diameters and cross sections.

 

26t (1)
Optical sensor’s interface cable — used to connect the optical sensor to USB port of your computer, has a length of 3m.

Buy SCATT MX-02

B. SCATT WS1

42t

SCATT WS1 — is used for fixed target training at distances from 5 to 10 meters and imitates shooting up to 1000 meters. Using pneumatic, small and large caliber sharpshooter weapons, archery bows, crossbows and other types of weapons.

Set of the simulator include:
21t

Electronic target – (Model: WT-01) installed instead of the usual target (hangs on the wall, Bullet catcher or mounted on a photo tripod), connected to the control unit, without requiring a separate power supply. In the special grooves on the body of an electronic target put paper target appropriate to choose an exercise and distance. Electronic targets can be used at ranges from 5 to 10 meters, which allows to train in different locations, using one electronic target.

To target the top and bottom are the LEDs red and green, designed for training with limited time on the shot (e.g. sport pistol). The target has a built-in wireless connectivity, and can be used with wireless optical sensors SCATT. Target is made of durable ABS plastic and can withstand bullets from hitting air rifle.

69t

Wireless optical sensor – (Model: WS-03) fixed on the firearm, this highly accurately measures the weapon’s alignment during aiming and actuation of the trigger mechanism. Metal fasteners of different dimensions, for use with various diameter barrels, allow the sensor to be fixed to the barrel or gas cylinder. Use collet framing to fix the sensor to the barrels of different pistol calibers. Optical sensor automatically measures the distance to the electronic target. The program allows you to automatically calibrate the sensor relative to the sighting of weapons, so there is no need for an amendment to the sights of weapons. Sensor automatically compensates for the “blockage” of weapons! For the convenience of an optical sensor has a convenient system mounting on the weapon, which allows you to vary the sensor position with respect to weapons. Optical has two-way infrared connection to electronic target.

To USB connector of optical sensor may be connected SCATT WTS trigger sensor.

Sensor has a built-in battery and can be recharged from the USB port of your computer. To fully charge requires 1.5 hours. Battery life approximately 30 hours of sight (about 10,000 shots with an average time of sighting 10s.). In case of non-use, the sensor automatically switches to low power mode. Weight 30g.

22t (1)
Electronic target control – (Model: WTC-01) connect to USB port of a computer by cable.

71t (1)
Mounting kit for the optical sensor — includes allen key, mounting prism and metal strip with screw that are used for fixing the sensor on the barrel of different diameters and cross sections. At the request of the customer set can be beefed up with extra fastenings see Fasteners (to secure optical sensor on the gun).

28t
Target interface cable — used to connect the electronic target to the control unit, has a length of 14m.
27t
Target control unit’s interface cable — used to connect the control unit to USB port of your computer, has a length of 1,5m.

26t (1)
Optical sensor charging cable — used to charge the optical sensor WS-02 from USB port of computer, has a length of 0,5m.

Buy SCATT WS1

 C. SCATT USB

23t

SCATT USB — is used for fixed target training at distances from 5 to 12 meters and imitates shooting up to 1000 meters. using pneumatic, small and large calibre sharpshooter weapons, archery bows, crossbows and other types of weapons.

Set of the simulator include:
70t

Electronic target – (Model: ST4-12) installed instead of the usual target (hangs on the wall, Bullet catcher or mounted on a photo tripod), connected to the control unit, without requiring a separate power supply. In the special grooves on the body of an electronic target put paper target appropriate to choose an exercise and distance. Electronic targets can be used at ranges from 5 to 12 meters, which allows to train in different locations, using one electronic target.
To target the top and bottom are the LEDs red and green, designed for training with limited time on the shot (e.g. sport pistol). Target is made of durable ABS plastic and can withstand bullets from hitting air rifle.

69t
Optical sensor – (Model: OS-02) fixed on the firearm, this highly accurately measures the weapon’s alignment during aiming and actuation of the trigger mechanism. Metal fasteners of different dimensions, for use with various diameter barrels, allow the sensor to be fixed to the barrel or gas cylinder. Use collet framing to fix the sensor to the barrels of different pistol calibers.

22t (1)
Electronic target control – (Model: WTC-01) connect to USB port of a computer by cable.

71t (1)
Mounting kit for the optical sensor — includes allen key, mounting prism and metal strip with screw that are used for fixing the sensor on the barrel of different diameters and cross sections. At the request of the customer set can be beefed up with extra fastenings see Fasteners (to secure optical sensor on the gun).

28t
Target interface cable — used to connect the electronic target to the control unit, has a length of 14m.

26t (1)
Optical sensor’s interface cable — used to connect the optical sensor to USB port of your computer, has a length of 3m.

27t
Target control unit’s interface cable — used to connect the control unit to USB port of your computer, has a length of 1,5m.

download copy
D20 clamp – used to mounting the optical sensor on barrels of 20 mm. diameter. Weight 12 grams.

 Buy SCATT USB

Shooting Accessories

A. Trigger sensor STS

Its a device allowing to obtain information about the effort which the shooter presses the trigger. The sensor made as a trigger with detachable cable, which attached to sport weapons instead of regular. Through the control unit sensor connected to USB port of your computer. Information from the pressure sensor graphically displayed in a SCATT software window.

Set of the sensor include:

77t
Trigger sensor — mounted on sports weapon (instead of the regular trigger). Connects to the control unit. Valid rod diameter for mounting the trigger is from 2 to 5 mm. Minimum distance from the rod mount the trigger to the inside of the trigger guard 27mm.
Modifications:
RR – round
RL – round for left handers
SR – straigth
SL – straight for left handers

22t (1)
Control unit — (Model: TRC-01) connect to USB port of a computer by cable.

46t
Trigger interface cable — used to connect the trigger sensor to control unit, has a length of 2,5m.

27t
Control unit interface cable — used to connect the control unit to USB port of your computer, has a length of 1,5m.

 

B. Trigger sensor WTS

75t

Trigger sensor – Pressure sensor on the trigger – a device allowing to obtain information about the effort which the shooter presses the trigger. The sensor made as a trigger with detachable cable, which attached to sport weapons instead of regular. Trigger sensor connected to USB port of WS-03 optical sensor. Information from the pressure sensor graphically displayed in a SCATT software window.

Set of the sensor include:

77t
Trigger sensor — mounted on sports weapon (instead of the regular trigger). Connects to the control unit. Valid rod diameter for mounting the trigger is from 2 to 5 mm. Minimum distance from the rod mount the trigger to the inside of the trigger guard 27mm.
Modifications:
RR – round
RL – round for left handers
SR – straigth
SL – straight for left handers.

75t
Trigger interface cable — connect to USB port of a WS-03 optical sensor, has a length of 0.5m or 1m.

 

C. Wireless optical sensor – WS-03

69t

Wireless optical sensor – (Model: WS-03) fixed on the firearm, this highly accurately measures the weapon’s alignment during aiming and actuation of the trigger mechanism. Metal fasteners of different dimensions, for use with various diameter barrels, allow the sensor to be fixed to the barrel or gas cylinder. Use collet framing to fix the sensor to the barrels of different pistol calibers. Optical sensor automatically measures the distance to the electronic target. The program allows you to automatically calibrate the sensor relative to the sighting of weapons, so there is no need for an amendment to the sights of weapons. Sensor automatically compensates for the “blockage” of weapons!

D. Pulse sensor

Its a device allowing to obtain information about the frequency and moments of heart beats. The sensor is designed as a wireless transmitter, fixed on the chest of shooter. Data from the transmitter receives the control unit that connects to the USB port on your computer. Information from the pulse sensor is displayed graphically in a shooting simulator window.

Set of the sensor include:

50t

Chest transmitter — transmits heart rate information to receiver at a distance up to 1 meter. Service life of 2,500 hours.

22t (1)
Receiver — (Model: PC-01) connect to USB port of a computer by cable.

27t
Receiver interface cable — used to connect the control unit to USB port of your computer, has a length of 1,5m.

 

E. SCATT & laptop carrying bag

58t

 

F. Trigger sensor interface cable.

46t

 

G. Control unit interface cable

27t

H. Optical sensor interface cable

26t (1)

 

I. Target interface cable

28t

 

J. Electronic target control WTC-01

22t (1)
 

K. Electronic target WT-01

21t
 

L. Electronic target SBT-5

32t

M. Optical sensor – OS-02

69t

 

N. Wireless optical sensor WS-M02

33t